HAWKER "HART" (SSM 20th Anniversary Cook-up)

K_mars · December 21, 2021, 10:13:41 AM

I will make HAWER "HART" at 1/72 scale according to the production article of "SCALE MODEL AIR CRAFT" by J.H. STEVENS that I got a long time ago. 1/72 matches the scale of the SKYBIRDS kit.

http://smm.solidmodelmemories.net/SMF/index.php?action=dlattach;topic=811.0;attach=7829;image

K_mars · December 25, 2021, 11:32:35 AM

I cut materials for fuselage by the method of "J.H. STEVENS".
The others are "My method" to make the fuselage separately on the left and right.

lastvautour · December 25, 2021, 12:18:49 PM

Nice to see progress photos Kenji.

Lou

Gearup · December 26, 2021, 04:09:43 AM

I like the doweled pinned fuselage halves.
Fraser

K_mars · December 26, 2021, 06:52:24 AM

Fraser, Thanks.

With the method of dividing into left and right, it is possible to draw the side shape of the fuselage inside.
The side shape is retained even after cutting the plane shape. Paper pattern is coated with superglue from the back side for reinforcement.
The rectangle opened on the paper pattern is for aligning with the reference line.

kenji

K_mars · December 26, 2021, 10:08:13 AM

I cut material for fuselage by the method of "J.H. STEVENS".
It's an orthodox method, but it's difficult to get an accurate right angle. The center line drawn on the fuselage disappears by cutting.

lastvautour · December 26, 2021, 01:59:34 PM

Thank you for the progress report.

Lou

Gearup · December 29, 2021, 06:34:28 PM

Putting the pattern inside the model halves is a great idea!
Fraser

K_mars · December 30, 2021, 11:28:13 AM

Thanks, Fraser

The tip of the fuselage is a circle.
Glue a thin plastic plate to make this part accurately and for protection. Then I shaped the fuselage.

lastvautour · December 30, 2021, 12:05:13 PM

I like the details of your build.

Lou

Boomerang · December 31, 2021, 05:56:56 AM

Great idea using the plastic disc.

Gordon

K_mars · January 02, 2022, 07:48:51 AM

Thanks, Lou, Gordon

The airfoil of "Hawker Hart" is RAF 28. The maximum wing thickness is 30-40% on the upper wing surface and 20-30% on the lower wing surface. Mark this position on the wood.

In "My method", the groove of the propeller shaft can be easily carved.

K_mars · January 03, 2022, 06:09:40 AM

It is easier to work by sticking it on the work table with double-sided tape to scrape the thin wings.
Sticking sandpaper on a wooden board will speed up your work.

lastvautour · January 03, 2022, 11:30:03 AM

I also love using a chisel for carving wings. I will try the double sided tape idea. Thank you.

Lou

K_mars · January 08, 2022, 11:19:11 AM

Fill the two slots with glue, and fix the centre section of the wing hard on to the board with a strip of cloth and drawing pins.

News:

HAWKER "HART" (SSM 20th Anniversary Cook-up)