FW190-D9

[K_mars]

I dedicate it to Fukuda.

Fukuda Kazu was the modeler who left many splendid models.
He was a member of the Osaka solid model club "SAIUNKAI".
Unfortunately he died in 2009.
On behalf of him, I show how to make FW190-D9.

kenji.

[K_mars]

The Japanese solid modeler uses the wood called HOO.

1. Fuselage
2. Fuselage extension
3. Main wing
4. Tailplane
5. Main wing fillet
6. Fuel tank
7. Propellers
8. Spinner, radiator

kenji.

[K_mars]

He separate an extension part and a cowling of the fuselage.He molds the fuselage.

kenji.

[K_mars]

He opens the part of the machine gun with a drill.He inserts a pipe of the brass and molds it.

kenji.

[K_mars]

He makes the main wing with one right and left.
He makes the landing gear storage with a plastic sheet.A heat presses a plastic sheet on the main wing.

kenji.

[K_mars]

He attaches the part of the fillet and molds it.

kenji.

[K_mars]

The landing gear storage Component.It is splendid work.

kenji.

[K_mars]

He makes the tail assembly with a sheet.The tabs are brass sheets.

kenji.

[K_mars]

He makes the radiator of the engine with paper.
This is paper of the calendars.Splendid reuse.

kenji.

[K_mars]

He makes propellers and spinner with a woods.The propellers creates four pieces in a mass.

kenji.

[K_mars]

The canopy presses a polyvinyl chloride sheet in the model of the wood and makes it.Tape of the masking is put.

kenji.

[K_mars]

He makes cowling flaps and other things and assemble the whole.

kenji.

[K_mars]

He makes legs with brass pipes and tires with chemical woods.

kenji.

[K_mars]

It is the completion of the mock-up.

kenji.

[K_mars]

He paints all parts with a primer.

kenji.