1/48 CAC CA-15 Completed 14 MAY 2021

[Boomerang]

Thank You Lou.

Managed to get some evergreen tubing so I'll see if I can knock up the exhausts

Cheers

Gordon

[Gearup]

Lou and yourself are definitely leading me to try an aluminium finish....
Fraser

[Boomerang]

Exhausts are done used the insulation off some comms wire I had lying around. Cut to suitable lengths and then Super Glued to a piece of
Thin styrene sheet. The evergreen tubes will come in handy later down the track.

Cheers

Gordon

[buccfan]

coming on nicely, regards Paul J.

[Boomerang]

Thank You Paul.

Gordon

[Boomerang]

I have bitten the bullet and have started putting this together.

Once all the gaps are filled and sanded a final coat of primer and then the silver.

Propeller blades are only rough fitted.

Cheers

Gordon

[lastvautour]

Looks great Gordon.

Lou

[buccfan]

Looking good Gordon, regards Paul J.

[Boomerang]

Shouldn't be too long from finished.

Bit of quality control to do.

Gordon

[Boomerang]

Decals applied. Bit of a battle but overcome.

The "P" is printed on clear and touched up with Canary yellow india ink using a nibbed pen then sealed.

I've left off the CAC logo on rudder for moment . Might experiment with shades of Silver.

Just thought I could probably have used a yellow paint with the pen. Bit easier to control than a brush with 3 hairs.

Need to clean up and attach the propeller blades and that is pretty much it.

Cheers

Gordon

[lastvautour]

Really coming along.

Lou

[Boomerang]

Thank You Lou.

Gordon

[Boomerang]

Nearly done. Bit of fiddling to do. Then I can apply my time to the Wirraway and Vindicator.

Decided on another project . Preliminary steps are done . Will update when more progress is done

Cheers

Gordon

[Boomerang]

Finished.

I've left off the radio mast and decided not to try different shades of silver.

Took a while but finally done.

Cheers

Gordon

[Boomerang]

And a couple more.