World War One Armistice 100th Anniversary - Cook Up

[lastvautour]

Fingers gave us this magnificent Siemens-Schuckert D-III 1/40 scale.



Lou

[lastvautour]

Larry, looking forward to your project photos.

Lou

[Boomerang]

Love the Siemens SIII. Great job.

Lou,

I used some evergreen angel and some thin sheet plastic cut into strips the appropriate width.

Made up a temporary jig ( using pins and blue tack) to hold the evergreen angle and marked off where the louvers were to go. Turned out relatively straight.

The work you've done with the pins is superb.

Cheers

Gordon

[lastvautour]

I made a box with Evergreen .015 X .080 inch strips and insert .030 rods. It came out pretty good. My large nuts on the sprocket holders are coffee stir sticks we picked up last Sunday's breakfast outing. I printed the image and glued it to the stick. I used large straight nail clippers at an outward angle to produce the nut. A few straight pins to hold the assembly in place. I amaze myself at time(not often) sometimes.

Lou

[lastvautour]

1/32 WWI Mark V tank.
Parts list:
3188 straight pins cut and inserted
100 wooden parts
253 Evergreen plastic strips and rods
4 pieces .100 inch copper wire.

Roll out at 8:00 hrs 6 Aug 2018.

[lastvautour]

1/32 WWI Mark V center section.

Lou

[lastvautour]

1/32 WWI Mark V rear section.

Lou

[lastvautour]

1/32 WWI Mark V tank front, rear.

Lou

[lastvautour]

1/32 WWI Mark V tank side views.

Lou

[lastvautour]

1/32 WWI Mark V tank details.

Lou

[Flying T]

working on more details-- found a very good plan for the lewis gun in one of wylams books,for 1/32 size is 1 1/4 in approx

[Boomerang]

Where the Macchi is up to.

Cheers

Gordon

[lastvautour]

Beautiful.

Lou

[lastvautour]

HMS Aurora. Some progress.

Lou

[Boomerang]

 
Lou,

Amazing work.

Gordon