Latest and greatest...

Boomerang · March 17, 2016, 12:24:17 AM

Well Done!

How did you end up doing the Kangaroo?

Gordon

Biggles · March 17, 2016, 12:32:12 AM

Thank you Lou and Boomerang, I drew a 'roo on paper then cut a stencil from contact over the top. I used oil paint. I did two coats, could have done more but I didn't want the surface built up two much. now onto wing tip fins.
Abe

Biggles · March 17, 2016, 03:13:38 AM

I was going to make the red wing fins this arvo but when I went over to my workshop there to greet me was a 2 foot snake. Probably there to look for sparrow eggs in the walls. With the temp being 36+ its not surprising. I'l give it an hour then keep going.

Biggles · March 17, 2016, 06:08:20 AM

Just found this site, Its quite good.
http://atallguy.com/Simple-Multi-View-Plans/

lastvautour · March 17, 2016, 12:31:35 PM

Thank you for the link. I will post it in the link section.

Lou

Biggles · March 19, 2016, 07:12:48 AM

Update: I found the post card that my uncle sent me, He said that he used Tamiya acrylics. XF-23 light grey and XF-54 dark sea grey for the skyhawk.
Biggles

Biggles · April 04, 2016, 01:34:32 AM

Started a Me 262. Pine (20mm) and MDF (5mm).

Have also started flying RC at the local club. (very addictive!)
Abe

lastvautour · April 04, 2016, 07:51:29 AM

RC is addictive for sure. I did it for a few years then family and work prevented doing it justice. I sold my two channel Sirius and went back to my first passion. What size is your Schwalbe?

Lou

Biggles · April 04, 2016, 10:55:12 PM

Lou, I haven't worked out scale yet but it is bout 1' long. Yes, they have some nice scale stuff at the club. Great inspiration!

Biggles · April 06, 2016, 12:15:07 AM

Not doing much, just sanding.

News:

Latest and greatest...