• Welcome to Solid Model Memories.net.
 

Cessna Skymaster Model 337 / USAF O-2B 1/32 Scale (Completed 03 May 10)

Started by lastvautour, March 17, 2010, 06:32:57 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

lastvautour

The Skymaster is a joint venture with Garet. His father flew the USAF O-2B version. This project also  blends well into my High Wing Wonders and the Observation Aircraft group build started some time ago. Si far, the fuselage has been cut and roughly shaped. I was going to make the wing blanks last night but then, life happens.

lastvautour

It took slightly longer than anticipate, but I finally cut out the remaining rough pieces for the Skymaster.


Lou

lastvautour

Sanding and shaping has taken place as well as forming the undercarriage.

http://smm.solidmodelmemories.net/Gallery/displayimage.php?pos=-4098

Lou
P.S. This multi posting on the same project will stop following the completion of the Cessna Skymaster. It is just to confusing to me and I assume to others as well. Sorry. Live and learn!!

lastvautour

Just humming along.


The wooden axle will be removed on the final model. Now for some sanding, priming and painting.

Lou

lastvautour


lastvautour

The Skymaster is complete and on display with my other 1/32 scale high winged airplanes. The project was fun to do and Garet gave me lots of info on the finish, so I hope I did it justice.

http://smm.solidmodelmemories.net/Gallery/displayimage.php?pos=-4330