• Welcome to Solid Model Memories.net.
 

1/72 scale Century Series Jets - F-106A................(Completed 11 April 2015)

Started by lastvautour, March 04, 2015, 08:03:38 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

lastvautour

Drawings scaled and printed.

Lou

lastvautour

The chips will fly shortly.

Lou

lastvautour

Additional block cuts.

Lou

lastvautour

Finally found time to tackle the Dart. The right was rough carved leaving the left with the alignment marks used to remove the excess wood.
The model will be made up of three major parts, wing, fuselage and tail fin plus two minor parts being the arrestor hook and the pitot tube.


Lou

lastvautour

Fuselage rough carved.

Lou

Boomerang


  Lou,

  Do you use templates for the fuselage section or the Mk1 eyeball?

  Gordon

lastvautour

I use three view drawing and the MK I eyeball. Sometimes it works, sometime it don't.

Lou

Boomerang


lastvautour

Actually it is the enhanced Mk I. The use of glasses is necessary for all activities.

Lou

lastvautour

Test fitting the wings.

Lou

lastvautour

Sanded down to 150 grit awaiting minor putty and then primer.

Lou

lastvautour

Primed and ready for the aircraft grey.

Lou

lastvautour

Drum roll please. The sixth Century Series Jet is completed. I used a combination of old kit decals, a few aftermarket pieces and some home made ones.

Lou

lastvautour

Additional photos.

Lou