Drawings scaled and printed.
Lou
The chips will fly shortly.
Lou
Additional block cuts.
Lou
Finally found time to tackle the Dart. The right was rough carved leaving the left with the alignment marks used to remove the excess wood.
The model will be made up of three major parts, wing, fuselage and tail fin plus two minor parts being the arrestor hook and the pitot tube.
Lou
Fuselage rough carved.
Lou
Lou,
Do you use templates for the fuselage section or the Mk1 eyeball?
Gordon
I use three view drawing and the MK I eyeball. Sometimes it works, sometime it don't.
Lou
You've got an excellent Mk1.
Actually it is the enhanced Mk I. The use of glasses is necessary for all activities.
Lou
Test fitting the wings.
Lou
Sanded down to 150 grit awaiting minor putty and then primer.
Lou
Primed and ready for the aircraft grey.
Lou
Drum roll please. The sixth Century Series Jet is completed. I used a combination of old kit decals, a few aftermarket pieces and some home made ones.
Lou
Additional photos.
Lou