Started at the flea market last Thursday until I slashed my thumb while talking and carving at the same time. Multi tasking is not longer effective in my case. Regardless, we are up to the block form stage for all major components. I will paint her up as CC-13801 or 13808. Photos and short history at http://www.115atu.ca/air-2ot.htm
Lou
Looks good Lou.
Thank you Gordon. At this point the dream of that perfect model is still alive and acts as a good motivator.
Lou
Same here.
Cheers
Gordon
Contour shaping done to rough stage. All parts except prop blades and flap hinges are cut and await sanding.
Lou
Twin Otter just out of the paint shop with a fresh coat of white primer. Wing struts and flap hinges will be attached once the gloss white has been applied. Decals have been ordered from CanMilAir.
Lou
(http://www.canmilair.com/prodimages/image_073.jpg)
http://www.canmilair.com/proddetail.asp?prod=073
Looks good Lou. Not a bad size at 1/144th
Cheers
Gordon
At 1/144 the Twin Otter is similar to smaller 1/72 model.
Lou
Decals have arrived. The windscreen is a trial run. Note the white haze. That is what happens when you rush and see the word gloss and don't bother reading the second word. White over decals don't work so good. Evergreen plastic strips are glued in place and will be shaped into the wing fences once dry.
Lou
Roll out 24 Dec 2014. That makes 4 United Nations aircraft supplied by Canada with 3 being built by De Havilland Canada. A relatively quick build once I put my mind to it. Decals are CanMilAir # 073.
Twin Otter 13808 was destroyed 5 Dec 1971 on the ground in Kashmir at the outbreak of the India-Pakistan war. That CC-138 was in Kashmir on UN assign.
Lou
Additional Photos.
Lou
Excellent Lou, the decals certainly add the details, well done.Regards Paul J.
Thank you Paul. The lading edges are decals also.
Lou