• Welcome to Solid Model Memories.net.
 

1/48 CAC CA-15 Completed 14 MAY 2021

Started by Boomerang, January 25, 2021, 11:31:14 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Boomerang


Thank You Lou.

Managed to get some evergreen tubing so I'll see if I can knock up the exhausts

Cheers

Gordon

Gearup

Lou and yourself are definitely leading me to try an aluminium finish....
Fraser

Boomerang


Exhausts are done used the insulation off some comms wire I had lying around. Cut to suitable lengths and then Super Glued to a piece of
Thin styrene sheet. The evergreen tubes will come in handy later down the track.

Cheers

Gordon

buccfan

coming on nicely, regards Paul J.

Boomerang


Boomerang


I have bitten the bullet and have started putting this together.

Once all the gaps are filled and sanded a final coat of primer and then the silver.

Propeller blades are only rough fitted.

Cheers

Gordon

lastvautour

Looks great Gordon.

Lou

buccfan

Looking good Gordon, regards Paul J.

Boomerang


Shouldn't be too long from finished.

Bit of quality control to do.

Gordon


Boomerang


Decals applied. Bit of a battle but overcome.

The "P" is printed on clear and touched up with Canary yellow india ink using a nibbed pen then sealed.

I've left off the CAC logo on rudder for moment . Might experiment with shades of Silver.

Just thought I could probably have used a yellow paint with the pen. Bit easier to control than a brush with 3 hairs.

Need to clean up and attach the propeller blades and that is pretty much it.

Cheers

Gordon

lastvautour

Really coming along.

Lou

Boomerang


Boomerang


Nearly done. Bit of fiddling to do. Then I can apply my time to the Wirraway and Vindicator.

Decided on another project . Preliminary steps are done . Will update when more progress is done

Cheers

Gordon

Boomerang


Finished.

I've left off the radio mast and decided not to try different shades of silver.

Took a while but finally done.

Cheers

Gordon

Boomerang


And a couple more.