• Welcome to Solid Model Memories.net.
 

1/32 Airco DH 5 Stárted July 2012 Completed 26 June 2015

Started by Boomerang, May 23, 2014, 05:53:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Boomerang


  The mark  towards the bottom of the left one is the "sellotape". I didn't update the margin settings before I printed it.
  The right sheet turned out great
  Gordon

lastvautour


Boomerang


  Managed to get home for Anzac Day and have attached the upper wing.
  I'm experimenting with rigging. The "blue tac" on the upper wing is not scale.
  The undercarriage is held on by blue tac for effect.
  Pretty happy with the result so far.

  Cheers

  Gordon


Boomerang


Further progress.
Wing rigging completed. Elevator controls completed. Using ezi thread.
Fuel tank pipe added.
Rudder controls won't be done till I summon the courage to apply the rudder decals and
attach to airframe.
Need to make up a pulley for the upper wing aileron control cable and a fairing for the lower wing control run.
Concurrent with this is to make a pitot for the starboard strut.
Picture to follow

Cheers

Gordon

lastvautour

You have been busy. Look forward to the photos.

Lou

Boomerang


Just plodding along with the time I get available.
One step at a time.
As a consequence all I've done for the X plane cook up is mull over a few plans
and scratch my head.
Hopefully get a picture up on Monday/Tuesday my time.
Cheers
  Gordon

Boomerang


Picture shows wing rigging complete. Fuel pipe added. Needs a bit of adjustment.
Managed to get one rudder decal on OK.
The  undercarriage is still not attached. Just in place for picture.
Onwards.

  Gordon

lastvautour


Boomerang


Boomerang


Have to clean up the rudder decals.
Roundels done.
Working on aileron pulleys / fairings
So things still to do....
         Aileron control runs.
         Rudder control run.
         Tailplane struts and rigging.
         Final rigging to wings.
         Add windscreen and gun
         Attach undercarriage and rigging.
         Attach propeller and spinner.

Cheers
  Gordon

Boomerang


  This shows the underside.
  For Clear Doped Linen  I've used white primer, Acrylic "Naples Yellow" and a light top coat and touch up with
Vallejo "Model Color"  Ice Yellow. Seemed to work.

  Cheers
  Gordon

Biggles

John 15:13

Boomerang


buccfan

Great progress Gordon, regards Paul J.

lastvautour

Great effect on the linen lower surfaces. This will be a magnificent model.

Lou