• Welcome to Solid Model Memories.net.
 

FW190-D9

Started by K_mars, September 21, 2011, 05:47:11 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

K_mars

I dedicate it to Fukuda.

Fukuda Kazu was the modeler who left many splendid models.
He was a member of the Osaka solid model club "SAIUNKAI".
Unfortunately he died in 2009.
On behalf of him, I show how to make FW190-D9.

kenji.

K_mars

The Japanese solid modeler uses the wood called HOO.

1. Fuselage
2. Fuselage extension
3. Main wing
4. Tailplane
5. Main wing fillet
6. Fuel tank
7. Propellers
8. Spinner, radiator

kenji.

K_mars

He separate an extension part and a cowling of the fuselage.He molds the fuselage.

kenji.

K_mars

He opens the part of the machine gun with a drill.He inserts a pipe of the brass and molds it.

kenji.

K_mars

He makes the main wing with one right and left.
He makes the landing gear storage with a plastic sheet.A heat presses a plastic sheet on the main wing.

kenji.

K_mars

He attaches the part of the fillet and molds it.

kenji.

K_mars

The landing gear storage Component.It is splendid work.

kenji.

K_mars

He makes the tail assembly with a sheet.The tabs are brass sheets.

kenji.

K_mars

He makes the radiator of the engine with paper.
This is paper of the calendars.Splendid reuse.

kenji.

K_mars

He makes propellers and spinner with a woods.The propellers creates four pieces in a mass.

kenji.


K_mars

The canopy presses a polyvinyl chloride sheet in the model of the wood and makes it.Tape of the masking is put.

kenji.

K_mars

He makes cowling flaps and other things and assemble the whole.

kenji.

K_mars

He makes legs with brass pipes and tires with chemical woods.

kenji.

K_mars

It is the completion of the mock-up.

kenji.

K_mars

He paints all parts with a primer.

kenji.