I recently made a nosecone for an Egg plane from the above parts, and Lou suggested to post what I did. The picture is self explanatory really, but I cut the silver section where it butts up to the white part, then cut the coloured body to the required length and used plastic cement to join them. I also removed the narrow section on the front of the silver and glued on a piece of sprue to seal the end. When the glue had set I fitted a piece of dowel tightly inside so I could hold it in a drill and gently shaped the nose to the required shape. The silver colour comes off when sanded. The Egg Plane idea is one I saw on Egg Plane Masters on Facebook not mine. Regards Paul J.
Thank you Paul. All ideas are welcomed.
Lou
i have taken that tip and fasten it upright on paper and get silicone and make a mold of it,then i use fiberglass resin for the model, you could the cut the nosecone to make various sized spinners