This is where the Oscar is at present.
Planning to paint it up as per the picture. Presents a bit of a challenge with how to do it.
Tail decal done. Just got to resize the wing and fuselage ones.
I plan to have the undercarriage lowered and am contemplating a plunge molded canopy ( contemplating is the word).
I've done the wheels out of balsa dowel strengthened with super glue. I will make the legs up out of brass rod. U/c covers have been done out of thin plasti card. Spinner done by hand using a piece of pine dowel.
Cheers
Gordon
I had to look twice at the picture. The model looked like it was part of the artwork on the book. Keep us informed on the plunge canopy technique; sounds interesting.
Fraser
Looking forward to the completed model. I see a French Oscar? Another VE Day project.
Lou
Looking good Gordon. Regards Paul J.
Thanks Paul and Lou.
I did toss up with the French one. I am going with the main picture . The dapple presents a challenge but that's half the fun.
Cheers
Gordon
Progressing along.
Working on undercarriage .
Pictures to follow
Stay Safe
Cheers
Gordon
Where the Oscar is at.
Undercarriage done from brass rod, solder , painters tape and insulation from wire garden tie.
the painted one has had a coat of white primer, mixture of gun metal and silver applied with brush. top coat of spray bare aluminium.
Engine gouged out
Cheers
Gordon
Interesting. How does the wire tie insulation fit in?
Nice progress.
Lou
On the picture of the undercarriage legs the wire tie insulation is the black bits. Between them is a strip of painters tape.
The bottom of the leg was built up with solder and filed to shape. The hinge is small diameter brass tube bent and squashed. Super glued in place
Hope this clarifies .
Cheers
Gordon
Looking good Gordon. Regards Paul J.
Thank You Paul.
Started throwing a bit of paint around and put some details on the wings.
Pictures to follow.
Cheers
Gordon
Where Oscar is at.....
Started putting it together.
I am not going to try and make a canopy this time.
Tail wheel done using brass rod and small diameter insulated wire for tyre.
Main wheels done. Drop tanks done out of 8mm pine dowel . Propeller completed . Just have to mix up some red/brown for the blades.
Navigation lights built up with layers of Tamiya primer ( out of the bottle).
The wing and fuselage stripes are still masked off from another layer of green.
Tail plane yet to be attached. I've worked out a method to do the mottle ( thank you Internet).
Decals drying.
Shouldn't be too long before it is finished.
Cheers
Gordon
Coming on nicely Gordon, regards Paul J.
Looking forward to your next post.
Lou
Starting to finish it off . I think I've got the right colour for mottle. Some decals applied.
Pictures to follow.
Cheers
Gordon
these two pictures show the start of putting on the mottle .
Seemed to work OK . Did experiment with a made up sponge but in the end a paint brush was used.
It is not the same as the illustration . Just let the mind and the brush do the work whilst trying to keep in mind not to create a pattern.
From what I can find out it was applied by hand using sponges .
Cheers
Gordon
Finished .
Leaving off the aerial wire . There are errors and omissions but it looks like a Ki-43.
Cheers
Gordon
Looking at something with spats
Excellent job Gordon, interesting colour scheme,nicely done.Regards Paul J.
Beautifully done Gordon. I like the colour scheme.
Lou
P.S. Just noticed the drop tanks. Nice touch.
That is a very nice looking model. It never occurred to me that a sponge could have been used to apply the mottled camouflage..
Regards
Fraser
Well done. Looks great!! - ken
Lovely job!
Jim
Thank you all . Enjoyed it and learned something along the way.
Cheers
Gordon