• Welcome to Solid Model Memories.net.
 

1/60 Gloster Meteor T MK 7 Commenced 24 May 2021 Completed 16 July 2021

Started by Boomerang, May 24, 2021, 11:03:14 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

lastvautour


Boomerang


I have to redo a couple of decals . There is a small bull and an Air Commodore pennant on each side of the nose.

I've painted the canopy and the black anti glare panel.

Not long now.

Gordon


Boomerang


Boomerang


Ooops !


lastvautour


buccfan


Boomerang


Thank you Paul and Lou.

Enjoyed it and learnt something on the way.

Cheers

Gordon


lastvautour


Boomerang


From memory and looking at the pictures I marked out the centre lines of the wing on the inner and outer sides . Marked the wing section.

"Roughly" cut out and fitted and fine tuned ( filing) to the wing. Bit of wiggle room to check alignment and stuck . Again from memory very little filler needed. Your method of cutting out the tops would be a bit quicker.

Hope this helps

Cheers

Gordon


lastvautour

Thank you Gordon. My wood has been selected and rough cut. I don't know hoe quickly I will get to it.


Lou