Print Page - Block Plane Stop with Bench Hook Plans

Title: Block Plane Stop with Bench Hook Plans
Post by: Model Maker on April 12, 2015, 05:42:38 AM

This little document illustrates the use of the Block Plane Stop to taper and shape wings and to plane thin pieces of wood. It's an add on accessory to a Bench Hook. Included in the document are a set plans for a Block Plane Stop and a corresponding Bench Hook which can be used for this and other purposes.

Title: Re: Block Plane Stop with Bench Hook Plans
Post by: lastvautour on April 12, 2015, 12:51:57 PM

I find the addition to the bench hook a great advance to what I have been doing. Thanks for posting.

Lou

Title: Re: Block Plane Stop with Bench Hook Plans
Post by: buccfan on April 14, 2015, 09:36:41 PM

Thanks for this and the sanding block PDF's. Regards Paul J.

Title: Re: Block Plane Stop with Bench Hook Plans
Post by: Model Maker on April 16, 2015, 01:09:43 AM

Paul:

It's my pleasure to share these little tidbits with the forum. As I've viewed the postings over the past several years, the collaboration and mutual support by the members has been great to observe. Thought it was only fair for me to contribute anything I have which will make modelling easier or more enjoyable for the members and viewers. I'm glad folks have found these items useful.

Best regards -ken

Title: Re: Block Plane Stop with Bench Hook Plans
Post by: Peter on April 19, 2015, 06:53:10 PM

Thank you Ken, very helpful.

Peter

Solid Model Memories.net

Tips and Techniques => Tools => Topic started by: Model Maker on April 12, 2015, 05:42:38 AM