Solid Model Memories

Solid Model Memories Member Gallery
Home > User galleries > SMM/RFBennett > 4 inch Drawknife Build
4 inch Drawknife Build Image 2
Drill the 1/2" holes for the radius where the tang and blade meet. Then using a hacksaw cut along the lines that intersect at the holes removing all the material with squiggly lines in image 2. Now is also a good time to cut the knife away from any extra steel if your bar was long. Rub beeswax on the sides of the sawblade to help it keep from binding. It would also be helpfull to insert your blade to cut on the pull stroke. Take your time, the cleaner the cuts now the less filing you'll have to do later.
Keywords: Drawknife

4 inch Drawknife Build Image 2

Drill the 1/2" holes for the radius where the tang and blade meet. Then using a hacksaw cut along the lines that intersect at the holes removing all the material with squiggly lines in image 2. Now is also a good time to cut the knife away from any extra steel if your bar was long. Rub beeswax on the sides of the sawblade to help it keep from binding. It would also be helpfull to insert your blade to cut on the pull stroke. Take your time, the cleaner the cuts now the less filing you'll have to do later.

DSCF9800~0.JPG 4_in_Drawknife_image_03_Small.jpg 4_in_Drawknife_image_02_Small.jpg 4_in_Drawknife_image_01_Small.jpg Lutz_File_Handle_No_1C_Small.jpg
File information
Filename:4_in_Drawknife_image_02_Small.jpg
Album name:SMM/RFBennett / 4 inch Drawknife Build
Keywords:Drawknife
Source::R.F.Bennett
Copyright::R.F.Bennett 2008
Filesize:160 KiB
Date added:May 04, 2008
Dimensions:576 x 284 pixels
Displayed:242 times
URL:http://smm.solidmodelmemories.net/Gallery/displayimage.php?pid=1413
Favorites:Add to Favorites